CONTACT Menu
Close
ABOUT US
PRODUCT
INDUSTRIES
RESOURCES
CONTACT US

PHONE
+1 407.337.0110

INFO
hello@redmeters.com

ADDRESS
6520 Pinecastle Blvd
Orlando, FL USA


OIL & GAS

THE CHALLENGE

When extracting fossil fuels, the cementing procedure is one of the most critical aspects of the process. Often times, the cement mixture becomes unbalanced causing it leave weak spots or cracks within the cement.

THE OPPORTUNITY

Our non-nuclear density meter provides an accurate, real-time, monitoring system to detect errors or fluctuation in the cement density. With this data, any errors can be corrected before the cement dries, thereby becoming a solution before there becomes a problem.

THE CHALLENGE

When extracting fossil fuels, the cementing procedure is one of the most critical aspects of the process. Often times, the cement mixture becomes unbalanced causing it leave weak spots or cracks within the cement.

THE OPPORTUNITY

Our non-nuclear density meter provides an accurate, real-time, monitoring system to detect errors or fluctuation in the cement density. With this data, any errors can be corrected before the cement dries, thereby becoming a solution before there becomes a problem.

INDUSTRY FLOW CHART

TECHNICAL SPECIFICATIONS

RM Series

ACCURACY

Overall: ± 0.25% of reading over 6:1 density range
Digital Response Time: 50ms
Measurement Time: 20 per second
Internal Diameters: 2" - 60" (50 -1524 mm)
Repeatability: ± 0.1% of full scale
Linearity: ± 0.018% of full scale
Pressure Coefficient: 0.1% / psi of full scale
Slurry Temperature Coefficient: ±.3% / 10°C of full scale
Calibration Standards: NIST, OIML, ASTM
RM Series

OPERATIONAL MAXIMUMS

Maximum Working Temperature: 150°F (65°C)
Maximum Pressure: Up to 600 psi (40 bar)
[Safety Factor of 3]
RM Series

INTEGRATION

Flanged Connections: ASTM, DIN, or BS
Environmental Protection: IP66/NEMA 4X
Housing: Powder-Coated Aluminum Shell
Insulation: Hi-Temp Fiberglass, ASTM Compliant
Pipe Supports: Carbon Steel, 5/8" (16mm) bolts
Gaskets: ASTM Compliant
Wiring: IFC Standards
RM Series

FEATURES

Internal Laser Source: Class 2 (FDA (CDRH) Part 1040.10)
Ambient Sensor Sampling: 50 readings per second
Storage Temperature: -40° to 175°F (-40° to 80°C)

GET IN
CONTACT WITH
RED METERS

yes no
* Required Field

GLOBAL SUPPORT

CONTACT US

+1 407.337.0110

6520 PINECASTLE BLVD
ORLANDO, FL USA
FOR INQUIRIES:
HELLO@REDMETERS.COM

CAREERS
CONTACT